During wheel building, please bring the spokes to an even tension with a maximum tolerance of 5% for all drive and all non-drive sides. For the recommended spoke tensions, please refer to the following chart.
|Wheel type||Non-drive side (F)||Drive side (R)|
|Road/Gravel/CX disc wheelset||120-130kgf||120-130kgf|
|Road non-disc wheelset||100-110kgf||125-135kgf|
Please don't forget to do Stress-Relieving: During and after wheel building, get the wheel stress relieved properly. If a spoke develops a sharp bend in it while building, please replace the spoke.
If any questions, please feel free to contact us by email (email@example.com), we will do our best to help you.